We are using 2 numbers of variable speed fluid coupling model SC- 16 at 1150 KW @ 740 RPM of M/s Fluidomat Limited, Dewas (India) for our main fans of the Dust Collector System. These are running satisfactorily since inception i.e. 1996.

This is to certify that that M/s Fluidomat Limited, Dewas (India) had supplied fluid coupling to replace the clutch between our FD Fan and Motor for major modifications in the Primary Reformer for power optimization and energy saving. The coupling was put in service in October 2003. Performance of the coupling with drive rating of 750KW @ 3000 RPM. The coupling was put in service in December 2004. The coupling is operating satisfactorily since installation and is providing automatic speed regulation on our continuously operating boiler feed pump.

This is to certify that Khaitan Chemicals & Fertilizers Limited had purchased a variable speed fluid coupling for 258KW @ 3000 RPM Fan Drive from M/s Fluidomat Limited, Dewas (India). The coupling was procured and installed in the year 1996 and is operating successfully and satisfactorily till date.

This is to certify that variable speed fluid coupling of M/s Fluidomat Limited, Dewas (India) was installed on our ID Fan 250 KW @ 1490 RPM Motor in February 1995. The coupling is working satisfactorily since then and we have been able to achieve an energy saving of 1330 units per day.

This is to certify that that M/s Fluidomat Limited, Dewas (India) had supplied variable speed fluid coupling to be installed between the Crusher Drier Fan and Motor (Cement Plant) with duplex oil circulation system with the objective of power optimization and energy saving. The coupling was put in service in May 2005. Performance of the coupling is found to be satisfactory till date. We have been able to achieve a power saving on the Fan Drive of rating 1480 KW @ 992 RPM.

Fluidomat make variable speed fluid coupling for 470 HP @ 740 RPM motor rating with all accessories for Fan application was supplied in 1996 for our Phoenix Paper Mill Project at Thailand. The coupling is working satisfactorily since then.

This is to certify that that M/s Fluidomat Limited, Dewas (India) had supplied fluid coupling to replace the clutch between our FD Fan and Motor for major modifications in the Primary Reformer for power optimization and energy saving. The coupling was put in service in October 2003. Performance of the coupling is found to be very satisfactory. We have been able to achieve a saving of approximately 400 KW of power due to replacement of clutch with Fluid Coupling.

We wish to inform you that variable speed fluid coupling of M/s Fluidomat Limited, Dewas (India) was installed on our Hydrate Filtration Overflow Pump of 400 KW @ 1400 RPM capacity in June 1992. The performance of the coupling is very satisfactory and no abnormalities have been observed so far.

Fluidomat make variable speed fluid coupling was commissioned in December 2006 on Fan Drive. We are able to achieve a power saving of 25KW after the installation of the fluid coupling.